Rubber Process Oil Features

rubber process oil

Rubber Process Oils

Are intermediate products with excellent processability, loading (filler) characteristics and tensile properties.

Rubber Process Oils

are perfect intermediate products to optimize required conditions.The compounder can achieve a workable mass with adequate dispersion of fillers through the selection of the correct process oils.

Rubber Process Oils

Are efficient secondary plasticizers in order to reduce cost.

Rubber Process Oils

Are offered in two kinds: Aromatic and Paraffinic.

Rubber Process Oil Types

Pressure-Volume-Temperature (PVT) properties of oils place them in one of the following groups

Aromatic Oils

Paraffinic Oils

Naphthenic Oils

rubber process oil

Paraffinic Oils

  • good high-temperature viscosity
  • good thermal and oxidative stability
  • used in EP elastomers
  • Methane, Ethane, Propane
Enquiry

Naphthenic Oils

  • yield medium viscosity
  • very available and inexpensive
  • used in Nitriles and other elastomers
  • Cyclopentane, Cyclohexane
Enquiry
RPO-rubber procces oil
Rubber Procces Oil-aromatic

Aromatic Oils

  • used in Natural Rubber and Neoprene
  • Benzene, Toluene, Xylene
Enquiry
SPECIFICATIONTest Method RPO245RPO250RPO290Furfural Extract (DAE)
Density @ 15°C kg/m3ASTM D-1298 980-1040 990-1020 980-1015 980-1040
Flash point (COC) °C ASTM D-92 200245230Min .180
Kinematic [email protected] °C (cSt) ASTM D-445 6-12 50-80 19-28 7-65
VGC ASTM D-2501 Max0.96 0.96 0.960.96
Aniline Point °C ASTM D-1287 Max26 Max32Max32-

TYPICAL CHARACTERIES OF PARAFFINIC PROCESS OIL

SPECIFICATIONTest MethodRPO840
Density @ 15°C kg/m3ASTM D-1298900
Flash point (COC) °CASTM D-92184
Kinematic [email protected] °C

(cSt) @40°C(cSt)
ASTM D-445
Min 5

21-28
VGCASTM D-2501 Max. 0.850
Anilline Point °CASTM D-61179

TDAE Specification

SpecificationUnitTest MethodResult
Appearance-VisualDark
Density @ 15°Ckg/m3 ASTM D-1298953
Flash Point (COC)°cASTM D-92246
Congealing Point°cASTM D-93833
Tota Acid NumberMg LOH/grASTM D-9740.12
Kinematic [email protected] °CcSTASTM D-445549.48
Kinematic Viscosity @50 °C cSTASTM D-445260.8
Kinematic Viscosity @100 °CcSTASTM D-44519.65
[email protected] °c-ASTM D-12181.5227
[email protected] °c -ASTM D-12181.5113
VGC-ASTM D-2501 0.895
Aniline point °cASTM D-61163
Refractivity Intercept-ASTM D-140.131.051
(Water Content (karl FischerppmASTM D-6304412.2
Sulphur Content%(W/W)ASTM D-26223Max.
Carbon Type DistributionCA/CN/CPASTM D-140.1323/39/38
Content Of PCA Extract %(W/W)ASTM D-3462.2

Rubber Oil 145

SpecificationTest Method
ASTM
RPO-135RPO-145
Kinematic [email protected] °C (cSt)D44530-4040-50
Flash Point (°C)(Min)D-92230240
Aniline Point (typical)D-61135-4530-40
Pour Point (°C)D-9733+27
Density @ 15.6°C(g/cm3)typicalD-40521.011.02
VGC (typical)D-25010.960.97

TDAE (Treated Distillate Aromatic Extract)

Good abrasion resistance – Good low temperature flexibility
Low amounts of waste tires in the process – Good resistance to reversion
Save fuel and energy consumption – Extended tires life time
Low enviromental impact

TDAE-Rubber Process Oil

Packing

This Product is available in Flexi Tank, ISO Tank and Steel Drum

Details

Home     Products     About     Contact     Privacy     Terms

N5, Babak Markazi ST., Tehran/Tehran,  Iran
+98 912 2269417